Three Short Stories about Hexaarylbenzene–Porphyrin Scaffolds

A feasible two‐step synthesis and characterization of a full series of hexaarylbenzene (HAB) substituted porphyrins and tetrabenzoporphyrins is presented. Key steps represent the microwave‐assisted porphyrin condensation and the statistical Diels–Alder reaction to the desired HAB‐porphyrins. Regarding their applications, they proved to be easily accessible and effective high molecular mass calibrants for (MA)LDI mass spectrometry. The free‐base and zinc(II) porphyrin systems, as well as the respective tetrabenzoporphyrins, demonstrate in solid state experiments strong red‐ and near‐infrared‐light emission and are potentially interesting for the application in “truly organic” light‐emitting devices. Lastly, they represent facile precursors to large polycyclic aromatic hydrocarbon (PAH) substituted porphyrins. We prepared the first tetra‐hexa‐peri‐hexabenzocoronene substituted porphyrin, which represents the largest prepared PAH‐porphyrin conjugate to date.     

A rapid dissolution procedure to aid initial nuclear forensics investigations of chemically refractory compounds and particles prior to gamma spectrometry

A rapid and effective preparative procedure has been evaluated for the accurate determination of low-energy (40–200 keV) gamma-emitting radionuclides (²¹⁰Pb, ²³⁴Th, ²²⁶Ra, ²³⁵U) in uranium ores and uranium ore concentrates (UOCs) using high-resolution gamma ray spectrometry. The measurement of low-energy gamma photons is complicated in heterogeneous samples containing high-density mineral phases and in such situations activity concentrations will be underestimated. This is because attenuation corrections, calculated based on sample mean density, do not properly correct where dense grains are dispersed within a less dense matrix (analogous to a nugget effect). The current method overcomes these problems using a lithium tetraborate fusion that readily dissolves all components including high-density, self-attenuating minerals/compounds. This is the ideal method for dissolving complex, non-volatile components in soils, rocks, mineral concentrates, and other materials where density reduction is required. Lithium borate fusion avoids the need for theoretical efficiency corrections or measurement of matrix matched calibration standards. The resulting homogeneous quenched glass produced can be quickly dissolved in nitric acid producing low-density solutions that can be counted by gamma spectrometry. The effectiveness of the technique is demonstrated using uranium-bearing Certified Reference Materials and provides accurate activity concentration determinations compared to the underestimated activity concentrations derived from direct measurements of a bulk sample. The procedure offers an effective solution for initial nuclear forensic studies where complex refractory minerals or matrices exist. It is also significantly faster, safer and simpler than alternative approaches.     

DIOPTAS: a program for reduction of two-dimensional X-ray diffraction data and data exploration

The amount of data collected during synchrotron X-ray diffraction (XRD) experiments is constantly increasing. Most of the time, the data are collected with image detectors, which necessitates the use of image reduction/integration routines to extract structural information from measured XRD patterns. This step turns out to be a bottleneck in the data processing procedure due to a lack of suitable software packages. In particular, fast-running synchrotron experiments require online data reduction and analysis in real time so that experimental parameters can be adjusted interactively. Dioptas is a Python-based program for on-the-fly data processing and exploration of two-dimensional X-ray diffraction area detector data, specifically designed for the large amount of data collected at XRD beamlines at synchrotrons. Its fast data reduction algorithm and graphical data exploration capabilities make it ideal for online data processing during XRD experiments and batch post-processing of large numbers of images.     

Influence of Molar Mass and Concentration on the Thermogelation of Methylcelluloses

In this study, thermogelation of methylcelluloses is investigated in relation to the molar mass and concentration in aqueous medium. A large hysteresis between heating and cooling ramps was observed whatever the conditions. The heating process in particular was studied to analyze the two steps of gelation using rheometry. At low temperature, in the sol state, viscosity depends on the concentration and molar mass. Over 30°C a gel-like behavior was observed including two steps (the second step is a strong gel with phase separation) having storage moduli that are nearly independent of polymer molar mass but are directly related to polymer concentration.     

A study of the effect of step excrescences and free‐stream disturbances on boundary layer stability

In this work, a study of the mechanism by which free‐stream acoustic and vorticity disturbances interact with a boundary layer flow developing over a flat plate featuring a step excrescence located at a certain distance from a blunt leading edge is included. The numerical tool is a high‐fidelity implicit numerical algorithm solving for the unsteady, compressible form of the Navier–Stokes equations in a body‐fitted curvilinear coordinates and employing high‐accurate compact differencing schemes with Pade‐type filters. Acoustic and vorticity waves are generated using a source term in the momentum and energy equations, as opposed to using inflow boundary conditions, to avoid spurious waves that may propagate from boundaries. The results show that the receptivity to surface step excrescences is largely the result of an overall adverse pressure gradient posed by the step, and that the free‐stream disturbances accelerate the generation of instabilities in the downstream. As expected, it is found that the acoustic disturbance interacting with the surface imperfection is more efficient in exciting the Tollmien–Schlichting waves than the vorticity disturbance. The latter generates Tollmien–Schlichting waves that are grouped in wave packets consistent with the wavelength of the free‐stream disturbance. Copyright © 2015 John Wiley & Sons, Ltd.     

电气材料铜及铜合金中痕量杂质砷元素的氢化物发生-原子荧光光谱法测定

本文建立了氢化物发生-原子荧光光谱法测定电气材料铜及铜合金中痕量杂质元素砷的方法。通过使用L-半胱氨酸与铜基体形成络合物,抗坏血酸充分预还原砷,消除了基体干扰,并实现了铜及铜合金中痕量杂质砷的准确测定。在经过优化的实验条件下,砷的检出限为0.12 ng·m L-1,线性相关系数优于0.999,相对标准偏差小于4%。用加标回收法测定实际样品,回收率在92%到103%之间。该法操作简便,灵敏度高,无需基体预分离。     

Incompressible fluid flow simulations with flow rate as the sole information at synthetic inflow and outflow boundaries

In numerically simulating heat and mass transport processes in an unconfined domain involving synthetic open (inflow and/or outflow) boundaries, how to properly specify flow conditions at these boundaries can become a challenging issue. In this work, within the context of a pressure‐based finite volume method under an unstructured grid, a solution procedure without the need for explicit specification of flow profiles at any of these boundaries when simulating incompressible fluid flow is proposed and numerically examined. Within this methodology, the flow at any open boundary is not necessarily assumed to be unidirectional or fully developed; indeed, the sole information required is the mass flow rate crossing the boundary. As a result, one can select the specific region of interest to perform simulations, rather than having to artificially increase the flow domain so as to invoke fully developed flow at all open boundaries. This not only greatly reduces computational costs (both in terms of memory requirements and simulation run‐time) but provides the means to engage with flow problems, which otherwise cannot be solved with currently available methods for handling the flow conditions at open boundaries. The proposed methodology is demonstrated by simulating laminar flow of an incompressible fluid in a two‐dimensional planar channel with a 90° T‐branch, a known inflow rate, and flow splits for the two outflow channels. The results obtained by placing the entrance and the two exits at different locations show that the flow behavior predicted is completely unaffected by using a highly truncated domain. Copyright © 2015 John Wiley & Sons, Ltd.     

Ambiguous anti-fouling surfaces: Facile synthesis by light-mediated radical polymerization

In an attempt to create a polymer brush-based platform for the systematic study for anti-biofouling surfaces, the benefits of surface initiated, visible light-mediated radical polymerization are utilized to fabricate well-defined, chemically ambiguously patterned surfaces. A variety of analytical tools are used to illustrate the precise tuning of surface chemistry and thoroughly characterize spatially well-defined, hydrophilic/hydrophobic surfaces composed of poly(ethylene glycol methacrylate) and poly(trifluoroethyl methacrylate) with chemical definition on the micron scale. Advantages of both visible light-mediated photopolymerization and traditional copper-catalyzed atom transfer radical polymerization are combined to achieve both high spatial control and expanded monomer tolerance. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 253–262     

Protic Anions [H(B12X12)]− (X=F,Cl, Br,I) That Act as Brønsted Acids in the Gas Phase

The acidity of protic cations and neutral molecules has been studied extensively in the gas phase, and the gas‐phase acidity has been established previously as a very useful measure of the intrinsic acidity of neutral and cationic compounds. However, no data for any anionic acids were available prior to this study. The protic anions [H(B₁₂X₁₂)]^? (X=F, Cl, Br, I) are expected to be the most acidic anions known to date. Therefore, they were investigated in this study with respect to their ability to protonate neutral molecules in the gas phase by using a combination of mass spectrometry and quantum‐chemical calculations. For the first time it was shown that in the gas phase protic anions are also able to protonate neutral molecules and thus act as Brønsted acids. According to theoretical calculations, [H(B₁₂I₁₂)]^? is the most acidic gas‐phase anion, whereas in actual protonation experiments [H(B₁₂Cl₁₂)]^? is the most potent gas‐phase acidic anion for the protonation of neutral molecules. This discrepancy is explained by ion pairing and kinetic effects.